MODEL
DG 3000 Oil/Water separator


APPLICATIONS
For Marinas, Service Stations, Garages,
Workshops and Small Industries.


PRINCIPLE OF OIL WATER SEPARATION
Gravity separation is the removal of oils and suspended solids from a water stream by allowing sufficient time in a low velocity basin for the oil droplets to rise to the surface and the solid particles to sink to the bottom of the water column.


THE DYNAGLASS COMPACT CPI
The Dynaglass Compact CPI oil/water separator makes this process most efficient by utilising a number of specially designed corrugated plates to intercept the oil and solids in the water accelerating this process.

Dynaglass Compact CPI treats effluent water up to a flow rate of 3 cubic meters per hour (790 US gall hr)

At this flow rate the quality of treated water can be expected to contain less than 20 parts per million oil trace in it.

The oil when separated flows into the oil skimmer, and is removed from the CPI by gravity through valves into portable containers conveniently placed at both sides of the CPI unit.  These containers are then replaced when filled.  The oil can then be recycled.  The treated water will flow by gravity into the drain or sewer.

The solids or sludge in the hopper can be removed by simply operating the sludge discharge valve when necessary from time to time.  No pumps are required as hydrostatic pressure of the unit itself will force the sludge to discharge from the CPI unit, when the sludge valve is opened.  The operation of the unit is easy and "mess-free".


ADVANTAGES OF THE DYNAGLASS COMPACT CPI

• Easy and quick to install.  No excavation necessary.

• Above ground installation allows for easy maintenance.

• Compact and mobile.  Easily transportable to where it is needed.  
     Installation only takes up to 2 sq. m of floor space.

• Can be operated by gravity, if preferred.  No power source needed.

• Economical to install and operate.